Skid Steer/Front End Loaders

 Anyone that owns a skid steer should have a set of Standard Duty Pallet Forks Frame on hand. Forks are ideal for lifting pallets, loading lumber or just about anything else. Our forks are 11/4 inches thick, 4 inches wide and 48 inches long. They are completely heat treated and rated to carry 4,000 lbs. We put a step on both sides of our frames so the operator can easily climb into the cab. Euro Style and John Deere mounts are available. 

Tractor Buckets available sizes 63", 66", 72", 78", 81" & 84" Call for Pricing 

 The Spreaders are ideal for seed, granular fertilizer, crystalline herbicides, pesticides, and sand. The all-steel construction makes it strong enough to endure rough handling and heavy use. The powder coat finish resists corrosion from exposure to chemicals and moisture.  The spreading width can be adjusted from 20’ to 46’, and a shielded drive line is standard. 

Our economy single and dual cylinder grapples are ideal for moving small logs, brush, rocks, or just about any type of debris. It leaves the dirt behind, which makes it an essential tool for clearing lots, as well as for storm damage clean up at job sites.

The economy dual cylinder grapple is designed for tractors, allowing owners to get the full potential from their tractors. Dual grapples allow the operator the ability to handle uneven and odd-shaped material.

All of our grapples are manufactured with top quality steel and will exceed the lifting capacity of the tractors that they are used with. They come standard with twin 2” bore by 10” stroke cylinders, and are available in 60”, 66”, 72”, and 78” widths.

Standard Duty Root Grapple Specs

Available as a single cylinder or dual cylinder setup

Recommended machine sizes: up to 45 HP.

2″ bore by 10″ stroke cylinders.

3″ square tubing.

Hydraulic lines routed inside the tubing to prevent tears.

Available Sizes: 60", 66”, 72”, 78"

Attaching an x-treme skid steer tooth bar to your existing bucket means you are ready for some serious digging. Simply drill a hole on each side of your bucket and bolt on the tooth bar. The shanks on the toothbar hook onto your existing cutting edge, where all the pressure is applied. The bolts simply hold the tooth bar on the bucket. Our tooth bar teeth are all replaceable, so you don’t have to worry about breaking one.

X-treme Skid Steer Tooth bar

Replaceable teeth.

Optional small teeth available.

Available Sizes: Any Size Needed.

Skid Steer Toothbar Extra Protection

Our Universal Skid Steer Toothbar are powder coated to give the attachment the best protection.

 These rotary cutters are designed for standard-duty applications such as weeds, grass, and light brush up to 1.5” diameter.  These cutters are designed to work with 15 to 65 hp tractors, and are available in 48”, 60”, and 72” widths.  These cutters use a single spindle with two free-swinging blades, which reduce the shock of impact when a stationary object is contacted.  A shear bolt through the input shaft or a slip clutch, if equipped, protects the gearbox and driveline from damage.  Standard equipment includes driveline shields and clutch shields.  Front and rear chain discharge shields are optional. 

 These Standard-Duty Box Blade Scrapers are designed specifically for working topsoil, gravel, mulch, or manure. Ideal for use on the farm, at building sites, or outdoor arenas.  These scrapers are designed to work with 15 to 45 hp tractors, and are available in five different widths from 48” to 96”. They feature three to six adjustable ripper shanks (dependent on the width of the unit). The box blade has a 17” moldboard height, 22” depth, 6” cutting edge, and is Category I quick hitch compatible. 

 These Standard-Duty Landscape Rakes work well for cleaning and preparing sites for seeding. They can spread rocks, move debris, and reshape soil. Designed for use by landscapers and contractors, they will meet the demands required for golf course maintenance, terracing hillsides, shaping run-off control ditches, and preparing areas for reforestation. The rakes feature a five-position angle adjustment, are available in widths from 48” to 96”, and are are Category I quick hitch compatible. 

 These Standard-Duty Grader Blades offer ease of moving topsoil, gravel, snow, and other similar materials. They are ideal for basic land grading, leveling, or backfilling needs and are designed to work with 15 to 45 hp tractors. They feature a five-position angle adjustment, a three-position tilt adjustment, and are available in four different working widths from 48” to 84”. These models are Category I quick hitch compatible. 

 The Spreaders are ideal for seed, granular fertilizer, crystalline herbicides, pesticides, and sand. The all-steel construction makes it strong enough to endure rough handling and heavy use. The powder coat finish resists corrosion from exposure to chemicals and moisture.  The spreading width can be adjusted from 20’ to 46’, and a shielded drive line is standard. 

 These Heavy-Duty Gear Driven Tillers are designed and manufactured for many years of dependable use.  Designed to work with 20 to 65 hp tractors, they are available in 48”, 60”, 72”, and 84” widths. With a gear-drive transmission and six tines per flange you can till down 8” deep.  A slip clutch protects the gearboxes and driveline from damage.